What's New |
|
 |
|
 |
PREPPUR Tired of manually prepping and purging catheters? Let the new PrepPur do the work for you! The new PrepPur is a portable, self contained, multi-station vacuum catheter purging system. The built-in vacuum pump is capable of more than 29.5 in. Hg (-14.5 psi) of vacuum. With control of Vacuum time, Vent time, and number of Cycles, the benefits are:
|
 |
VACCUM PURGER When developing a test program in Mode 2, the operator will be prompted to enter the desired Compliance, Ramp rate, Initial pressure, Pressure increase increment value, Maintain pressure time, Dwell at pressure time, and Burst/Leak parameters. During the test the Burst-Leak Tester will achieve and maintain the proper ramp rate and achieve the proper initial pressure. It will Maintain pressure for the programmed time to allow for test product compliance. It will then switch to Dwell at pressure, stop maintaining the pressure, and continuing to look for leaks or bursts. When Dwell at pressure time is complete, the Burst-Leak Tester will add the Pressure increase increment value to the current pressure and proceed to the new target pressure at the programmed ramp rate. |
 |
"Big" Water Bath Crescent Design announces the release for sale of our new “Big” Water Bath. Due to the increasing length and diameter of catheter balloons, the standard Crescent Design water bath was unable to accommodate larger sizes. The new “Big” Water Bath paired with the Keyence LS7070M Optical Micrometer is the perfect solution for taking diameter measurement readings of all your products, big or small. The “Big” Water Bath is available with a standard lid or balloon holder / catheter holder lid. Please contact Crescent Design at 858-452-3240 or cdisales@crescentdesign.com for more details. |
